Function

This range of connection modules has been designed for interconnecting and patching 120 Ohms (twisted pair) links.

These modules are fitted to Digital Distribution Frames (DDF) located in the telephone exchanges.

Design

The range consists of 6 modules based around the specifics described below :

• Cable end (upper), the choice is between incoming from the rear or from the side, with or without individual connection of shielding per pair.
• Jumper end (lower), 2 types of wire-guide channels enabling the connection of shielded or non shielded jumpers.

- Fontionnalities :

• 8 pairs disconnecting modules

- Insulation displacement contact (IDC) :

• Wire from 0.32 to 0.8 mm
• Insulator max. diameter : 1.5 mm

- Flame class rating :

• UL94V0 (LSZH)

P/N 89686 (blue) :

This module enables the connection :

• At the rear, of a multipair cable and the general shielding of the cable to the IDC pin, with harness guide.
• At the side, of shielded jumpers with diameters up to 4 mm with individual connection of the shielding.
• Dimensions : 135 x 69 x 19 mm

P/N 89716 (blue) :

This module enables the connection :

• At the rear, of a multipair cable and the general shielding of the cable to the earth plate, with channel guide.
• At the side, of shielded jumpers with diameters up to 4 mm with individual connection of the shielding.
• Dimensions : 135 x 69 x 19 mm

P/N 93574/93863:

This module enables the connection :

• At the side, of a multipair cable in pairs (93574) or quads (93863) and general cable shielding to IDC pin.
• At the side, of non shielded jumpers with diameters up to 3 mm.
• Dimensions : 135 x 69 x 18 mm

P/N 89713 (blue):

This module enables the connection :

• At the side, of a multipair cable , the general cable shielding to the IDC pin, with guide per channel (dia. 3 mm max).
• At the side, of shielded jumpers with diameters up to 4 mm with individual connection shielding.
• Dimensions : 135 x 69 x 20 mm

P/N 89715 :

This module enables the connection :

• At the side, of a multipair cable , the general cable shielding to the IDC pin, the individual connection of the screens per pair to IDC with guide per channel (dia. 4 mm max).
• At the side, of shielded jumpers with diameters up to 4 mm with individual connection shielding.
• Dimensions : 135 x 69 x 22 mm

Accessories :

The COMPAX range has a large number of different modules (colour, marking,...) and a lot of accessories (label, holders, cutting shim, protective elements, etc...).

Please call.