FunctionLocated on the horizontal part of the distributing frame, the wrapping terminating blocks enable the jumper connection of the cable head and the switching equipment. The RC8W cut-off function enables the isolation and testing of the line. DesignThe wrapping terminating blocks consist of a support base with a wire bushing, to which are fixed the cut-off with double pin switches (RBDC8W) with a capacity of 8 pairs. The connection is by wrapping on a 0.6 x 1.5 mm pin as per the NFC 93021 Standard. The allowable diameter of the wires must be between 0.4 and 0.6 mm. Located on either side of the terminating block, 2 label holders make it easier to identify the pairs. A set of clamps enable the fixing to flat iron profile (maximum width : 30 mm). Features| H2S resistance | Yes | | Contact resistance | < 20 mW | | Shock wave | 3 kV (1.2/50 µs form) | | Flash point | > 400°C | | Oxygen index limit | > 30 |
|
